Error Message File Does Not Have a Program Associated with It Error Message When You Use the Run Command to Browse to a Web Site

9:14 AM |
When you attempt to browse to a Web site by typing the Web address in the Open box of the Run dialog box, you may receive the following error message:

This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel.

This behavior can occur if both the following conditions are true:

  • You turn off access to Microsoft Internet Explorer from the Start menu and desktop.-and-

  • You click Start, click Run, type the Web address of the Web site that you want to browse to in the Open box, and then click OK.


After you turn off access to Internet Explorer, you cannot use the Run command to connect to a Web site by using MSN Explorer.

To work around this issue, use either of the following methods.

Method 1


// Start MSN Explorer, and then type the Web address of the Web site that you want to browse to in the Address bar.

Method 2


// Turn on access to Internet Explorer from the Start menu and desktop, and then use the Run command to browse to the Web site that you want. To do this, follow these steps:

  1. Click Start, and then click Control Panel.

  2. Double-click Add or Remove Programs, and then click Add/Remove Windows Components.

  3. In the Components list, click to select the Internet Explorer check box, and then click Next.

  4. Click Finish.

  5. Click Start, and then click Run.

  6. In the Open box, type the Web address of the Web site that you want to browse to, and then click OK.


Via Microsoft
Read more…

Error Message File Does Not Have a Program Associated with It Error Message When You Use the Run Command to Browse to a Web Site

5:14 AM |
When you attempt to browse to a Web site by typing the Web address in the Open box of the Run dialog box, you may receive the following error message:

This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel.

This behavior can occur if both the following conditions are true:

  • You turn off access to Microsoft Internet Explorer from the Start menu and desktop.

    -and-

  • You click Start, click Run, type the Web address of the Web site that you want to browse to in the Open box, and then click OK.


After you turn off access to Internet Explorer, you cannot use the Run command to connect to a Web site by using MSN Explorer.

To work around this issue, use either of the following methods.

Method 1


// Start MSN Explorer, and then type the Web address of the Web site that you want to browse to in the Address bar.

Method 2


// Turn on access to Internet Explorer from the Start menu and desktop, and then use the Run command to browse to the Web site that you want. To do this, follow these steps:

  1. Click Start, and then click Control Panel.

  2. Double-click Add or Remove Programs, and then click Add/Remove Windows Components.

  3. In the Components list, click to select the Internet Explorer check box, and then click Next.

  4. Click Finish.

  5. Click Start, and then click Run.

  6. In the Open box, type the Web address of the Web site that you want to browse to, and then click OK.


Via Microsoft
Read more…

Error Message File Does Not Have a Program Associated with It Error Message When You Use the Run Command to Browse to a Web Site

5:14 AM |
When you attempt to browse to a Web site by typing the Web address in the Open box of the Run dialog box, you may receive the following error message:

This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel.

This behavior can occur if both the following conditions are true:

  • You turn off access to Microsoft Internet Explorer from the Start menu and desktop.

    -and-

  • You click Start, click Run, type the Web address of the Web site that you want to browse to in the Open box, and then click OK.


After you turn off access to Internet Explorer, you cannot use the Run command to connect to a Web site by using MSN Explorer.

To work around this issue, use either of the following methods.

Method 1


// Start MSN Explorer, and then type the Web address of the Web site that you want to browse to in the Address bar.

Method 2


// Turn on access to Internet Explorer from the Start menu and desktop, and then use the Run command to browse to the Web site that you want. To do this, follow these steps:

  1. Click Start, and then click Control Panel.

  2. Double-click Add or Remove Programs, and then click Add/Remove Windows Components.

  3. In the Components list, click to select the Internet Explorer check box, and then click Next.

  4. Click Finish.

  5. Click Start, and then click Run.

  6. In the Open box, type the Web address of the Web site that you want to browse to, and then click OK.


Via Microsoft
Read more…

How do I search for a email, for attachments, or for text

12:22 PM |
Yahoo! Mail’s Search can find almost anything in your entire account – messages, attachments, names, words, and photos. The Search box is in the upper-left part of the page, to the right of the "New" button.

How do I search for a email, for attachments, or for text

The Search box is in the upper-left part of the page, below the Check Mail and New buttons.
Read more…

How to Connect PC to HDMI TV

10:28 PM |
Connect PC   to HDMI TV

Connect PC to HDMI TV

There are now many ways to enjoy your favorite movies and television shows over a broadband internet connection on your computer for a small amount of money, or even for free. Unfortunately, watching such media in the confines of your home office does not make for the most enjoyable experience. If you would like to escape the office, however, and enjoy your entertainment on the big screen in the living room, this guide will detail how to connect a PC to an HDMI TV.

Instructions

  1. Step 1


Turn your computer off, and turn it around to view the rear of the unit. Find the cable that comes from the computer's monitor, and follow it to the back of the PC. The cable will be plugged into the output of the video card, which will be either a 15-pin VGA port or a 29-pin DVI port. If you are fortunate, there will be a second port directly next to it, of either the DVI or VGA variety. On the newest machines, you may even find a regular HDMI port on the card.

  1. Step 2


Choose the connection for video output. If your computer has an HDMI port, you can simply connect an HDMI cord of the correct length between the computer and the TV. Otherwise, you will need to make a few decisions. If your computer has only a single video output, and it will not be used solely with the television, you may want to invest in a new video card. Purchase one with either a DVI or an HDMI output, and install it in an available slot, according the instructions included with it. If you intend to use the VGA output on a single-output or dual-output card to drive the HDMI display, then a special device will be needed to convert between the formats, and the price of the converter is actually about the same price as an entry-level video card that will be easier to use with your TV. In that case, it may be a wise idea to upgrade the card in order to obtain a DVI or HDMI port. However, if your chosen output port is of the DVI variety, an inexpensive DVI to HDMI cable can be purchased to convert your computer's output into the proper HDMI input for your TV.

  1. Step 3


Connect the HDMI cable from your television to your computer. Install the correct adapter or converter for your computer, if necessary. Unless your computer has HDMI output, cords will also need to be connected from the sound card output to the HDMI video cable or adapter, because HDMI carries both video and audio signals.

  1. Step 4


Boot your PC, and configure the new display, by selecting "Control Panel" from the "Start" Menu. Then double-click the "Display" icon and click the "Settings" tab. The manual for your HDMI TV will list the screen resolutions it supports, along with the refresh rates. Configure the resolution in the "Settings" tab, and then click the "Advanced" button to set the refresh rate. If you are using the HDMI TV as the second monitor, you will also have to configure how it is used by Windows, according to the instructions pertaining to your video card. Most cards offer a "Clone" or "Mirror" mode, where both screens display the same content. Alternately, the "Extended Desktop" mode can be used, in which each monitor will operate independently.

  1. Step 5


Reboot your PC to apply the changes, if necessary, and prepare to relax on your couch and watch your movies on the big-screen HDMI TV.
Read more…

Find Out What Keywords are Bringing Visitors to Your Site with Google Analytics

5:29 AM |
Google Analytics is a wonderful free tool for webmasters to track stats. The only problem with it is that some of the most common tasks seem abnormally difficult to do, or are buried under a bunch of menu items with strange names.

A common task for a webmaster or blogger is trying to figure out what keywords are bringing users to your site. This can help you optimize by including the right keywords in your articles or posts.

To do this, you will first want to select a date range that you are trying to look at. There is a calendar in the bottom right hand corner that you use to set the date range.

Now you will select All Reports \ Marketing Optimization \ Marketing Campaign Results \ Source Conversion, as seen in the picture below:



Once you are there, you click on the little red circular arrow button, select Cross Segment Performance, and then Keyword.

You will now see a graph similar to the one below, and also a table of actual data. I’ve omitted the table of data because I’m not sure if I want to share my exact numbers with people, but you should still get the idea.



You can also export a full list of these keywords by clicking one of the export formats shown in the picture below:



It’s useful to compare your keywords from month to month, to see how your content and articles bring in visitors over time. You may find that certain keywords do better during certain months.
Read more…

Virtual Keyboard for Google Search

12:58 AM |
Google started to show a virtual keyboard next to the search box if you use Google search's interface in a non-Latin language like Arabic, Russian or Greek.

"Our virtual keyboard allows you to enter the precise search terms you want, regardless of the language keys on your physical keyboard. It can be helpful for people who use one of the many non-Latin script-based languages that require special characters," explains Google.

Here's an example of virtual keyboard for Mongolian:



The nice thing about Google's virtual keyboard is that, after clicking on the keyboard icon next to the search box, you can use the keys from the virtual keyboard or you can use your keyboard. "The corresponding key on the virtual keyboard will be typed in the search box rather than the character shown on your physical keyboard."
Read more…

Retrieve, View or Display Wireless (WEP or WPA WiFi) Network Security Key or Password in Windows 7

12:17 AM |
Windows 7, like its predecessors, remembers and saves (on user consent) the network security key or password on first connection to a secured wireless (WiFi) network which is protected by WEP, WPA or WPA2, so that Windows 7 can automatically authenticate, sign in and connect to the Internet through the wireless access point or WiFi hotspot on every system startup.

For many reason, end users may want to retrieve or view the WEP, WPA or WPA2 protected wireless network security key. For example, lost or forgotten administrator password making it impossible to view the serial key on the Wi-Fi wireless gateway or router, or need to setup new computer to access the Internet through same wireless network adapter or Wi-Fi hotspot.

The quickest way to get the network security key for an existing wireless connection, of course, is from the PC or computer which is currently connected to the wireless network. Although the network security key is saved and stored in local Windows computer, Windows OS does not provide an easy way to retrieve, view or display the network security key or password on screen, in plain text and not hidden as asterisk, until Windows 7.

How to Recover, Retrieve, Show or Display Network Security Key for WEP, WPA or WPA2 Protected Secure Wireless Network in Windows 7

  1. Go to Control Panel -> Network and Internet -> Network and Sharing Center.

  2. Click on Manage wireless networks on the left pane.


Manage Wireless Network

  1. A list of wireless networks that the PC used to connect to with saved password or security key. Click to highlight on a wireless network connection that user wants to view its network security key, and the right click on it and select Properties.


Wireless Network Properties

  1. Click on Security tab.

  2. The network security key for the wireless network is hidden by asterisk by default. Instead of using utilities to reveal, display or show original characters of password or key hidden behind asterisks, click on Show characters button to reveal and display the actual original network security key on screen.


Wireless Network Security Key
Read more…

ADS